기본기능
Maintenance
Cleaning the bottom and toilet bowl
Unplug and shut the water supply off, then flush
toilet and hold down dandle to completely empty
tank.
Disconnect water supply hose from the bidet seat.
You use a bucket to catch any dripping water from
the bidet and hose.
Press the bidet release lever and gently pull inward
to remove the bidet seat.
Use a soft, damp cloth and mild/neutral cleanser
(such as dish soap) to wipe down the bidet body and
remove the cleanser completely.
In case of cleaning the toilet, remove the catch plate
first. Make sure there is no cleanser left on the toilet
after cleaning. Cleanser residue may damage the
bidet body.
Product storage
Keep the unit plugged in to prevent freezing if the
bidet seat is installed in a cold place.
When the bidet seat is not used for an extended
period of time, unplug. When it is reused after it is
stored in a cold place, keep the unit in a warm place
for a while before plugging in.
Maintenance
※ Dual protection (dryer inner cover and closed nozzle cover) protects the
bidet seat from contamination and water damage.
Turn off the water supply and hold the toilet flush
lever down to empty the tank completely.
Unplug the bidet seat, remove from the toilet and
disconnect the bidet hose. You may use the bucket
to catch any dripping water from the hose and bidet
seat.
Remove the screen filter from the water inlet with a
long-nosed pliers.
Clean the filter with a toothbrush and re-install it
correctly.
Reconnect the bidet hose and place the bidet seat
back, Plug the power cord back and turn the water
supply back on. Check for leaks.
Cleaning the screen filter
Do not use thinner, benzene, acidic chemicals,
chloride, or hydrochloric acid detergent.
Do not scrub or use harsh, abrasive products to
clean the seat.
Use a soft, damp cloth and mild cleanser and do not
spray water excessively onto the bidet seat.
If the contamination is serious, use the mild
detergent (such as dish soap) only and make sure
there is no residue after cleaning.
Do not use any aerosol(spray) products nearby. This
may result in discoloration of the bidet body.
Unplug first before cleansing, and be aware of not
wetting the power plug.
Be careful of not to drop any chemical detergents
of toilet cleanser on the water supply hose or power
plug.
Cleaning bidet seat body
28
29
Summary of Contents for DIB-N800 Series
Page 20: ...www lsdaewon co kr ver 2207...
