Daemyung Webgate HDC420F-PD, User Manual

Page: 36 / 118

35
Auto switch mode(Sequence)
Auto switch screen mode is a feature in which the selected channel or multi screen division switches in sequence
with the time interval of 1 – 60 seconds.
(Please refer to “Monitor setup” for further configuration method).
Auto Switch mode can be set in every division mode by pressing the [SEQ] button.
Press [SEQ] button once more to leave from Auto Switch mode..
Check video
When turned on, DVR starts booting automatically and shows screen after the booting.
<reference>
Auto login “ON” : means login set without any login dialogue box (default - auto login ON, admin)
Auto Login “OFF” : means there will be dialogue box requiring password.
Event screen
It is available to set the selected screen pop-up automatically when an event is triggered
Users can choose events for pop-up from event source. Event source supports Sensor, Motion Detection, No
video, Text, System event and so on.
If multiple events are triggered, the corresponding screens will pop up automatically.
For example, if events are triggered in 3 Channels, they will be displayed in 4 screen division automatically. To
return to the original channel, press the button of one of the poped up channels.
Press [ESC] to return to original channel.
<Warning>
1. Image popup will be performed after setting image popup “enable” and selecting event source (sensor, motion
detection, no video, text).
2. To use flame detection function, Webgate’s flame detection camera (C1080(P)BL-AF-F2/N1080BL-AF-F2/C1080BL-
F1/C1080(P)D-F1) should be connected. After connection, DVR can automatically detect the sensor as a flame
detector. (It is not possible to change the sensor type by manually.)