Daemyung Webgate HDC420F-PD, User Manual

Page: 50 / 118

49
name Function description
type Displays the location and types of a disk.
Int A (internal A HDD), Int B (internal B HDD), eSATA (external HDD), USB
model Displays HDD model.
BAD block Highlights the HDD with BAD block. 0 is shown when there is none. For HDDs not in use,
no bad block is displayed.
size HDD size will be in MB.
S.M.A.R.T Displays if HDD can be used or not.
- Good : normal
- Bad : abnormal (HDD needs to be replace.)
Enable Displays if HDD is in use or not.
Yes : can be used / No : can’t be used
Enable YES
- select HDD in HDD NO mode and click [enable] button.
- A HDD which is used for DVR does not need additional format. New HDD should be formatted by DVR.
Enable NO
- select HDD in HDD YES mode and click [disable] button.
FORMAT
- can only run when enabled and click [format] after selecting HDD that needs to be formatted.
RAID manager
This is the menu that manages RAID of internal HDD and HDD
installed in NS04R.
Steps to configure RAID
1) Select “NO” to all HDD activate in “Disk manager“
2) Select device of creating RAID (DVR/NS04R) in RAID MANAGER“
3) Select RAID Level(1/5/10) after selecting RAID members.
4) Create RAID by clicking “Create RAID” then all selected HDDs will
operate in one “DVR RAID Disk”
5) If you activate “DVR RAID Disk” in Disk manager” it will be sued
as storage of DVR.“
name function description
Raid Member Select disks that need to be in Raid.
Raid Level Select Raid Level 1, Level 5, Level 10.
Create Raid Create Raid with selected Raid Member and Raid Level.
Raid ID Displays Raid ID.
Disk Status Online : HDD is connected, Offline : HDD is not connected.
What is RAID?

RAID(Redundant Array Independent Disk) can store the data using the pre allocated parity territory if
there is an error in hard disk.

Supports RAID 1, 5, 10 and auto restore function when replacing a defective hard disk.
Of hard disks and RAID construction methods.

Depending on the # of hard disks installed in DVR, availability of RAID level will differ.
menu

system

disk

RAID manager