Daemyung Webgate HDC420F-PD, User Manual

Page: 47 / 118

46
NTP
NTP (Network Time Protocol) synchronizes the time of all connected
device. To set DVR time to standard time open server which offers
standard time on the network and client which is connected to
open server to receive time and synchronize it with standard time.
Besides that DVR can be set as server to offer standard time to
other devices and can be set as both server and client as well.
NTP server location
Enabled when NTP mode is set as client/server. Select if NTP server
is public or local.
NTP local server IP
Enabled when NTP server is set as local and sets server IP address.
Enter NTP server IP address located in local network or DVR IP
address with NTP mode as a server.
NTP mode
Set DVR NTP mode to client, server or both.
Name function description
client Receives standard time from external or internal server and enable Time
synchronization of DVR
server Make DVR a NTP server and provide standard time to other DVR or devices.
both use both client and server at the same time
Interval
Configure interval of time sync.
Disk
Internal, External HDD can be added, deleted or formatted.
Overwrite (Auto Deletion)
Image is recorded overwrittiing from the beginning of HDD when
HDD is full.
Stop Recording
Record stops when HDD is full.
Block Playback
This function allows only recordings of pre-assigned date to be
viewed.
For example, after 10 days of recording(picture 1), if playback block
is set at 2 days(picture 2), then as shown
in the picture, only the last 2 days of the recordings can be played
back.
menu

system

date/time

Network Time Protocal(NTP)
menu

system

disk