Daemyung Webgate HDC420F-PD, User Manual

Page: 62 / 118

61
IP Configuration
IP camera or other DVR’s channel can be configured.
To register IP camera:
1. Select Protocol.
2. Click “Search Local IP Camera” button. It will show the list of IP
camera and DVR connected in the same network.
3. Click the searched unit and click the “Insert” button. Or user can
configure the IP address, port number, user ID and password manually.
4. Click the “Test” button to check login.
- If failed, please check the configurations.
5. If login succeed, close the window.
6. Click “Save Changes” button to apply.
* “Clear” button can erase all configurations at once.
<Note>
1. IP camera registration
1) Webgate’s IP camera: select WESP
2) IP camera supporting Onvif: select Onvif
2. DVR’s channel Registration
1) Supporting Models: 16 CHANNEL FULL CASE POC DVR, 16 CHANNEL
FULL CASE DVR, 16 CHANNEL FULL CASE RAID DVR, 8 CHANNEL MIDDLE
CASE POC DVR, 8 CHANNEL MIDDLE CASE DVR, 4 CHANNEL SMALL CASE
POC DVR, 4 CHANNEL SMALL CASE DVR
2) Supporting channels
(1) Lower than FW 8.2 – max 10 channels when no user is connected.
(2) FW 8.2 and upper version – All channels of DVR
3) Only WESP can be selected.
4) Frame rate (number of frame per second) can be decreased by the
number of connected users.
Privacy
Each channel can have 4ea pricacy mask zones (black quadrangle).
Live/Record/Playback image will not be shown in privacy masked zone.
<Note>
IP camera channel do not support privacy function.
Please use webpage of IP camera to use more detailed functions of IP camera.
PoC status *
Status on PoC camera and PoC adaptor connected to DVR can be
checked.
Reactive
In case there is overcurrent on the channel PoC camera is connected
there will be icon of lightning and cut off power. After overcurrent issue
is resolved and click Restart to supply power again.
Restart button is hidden in normal situation. Only shown in overcurrent.
* Adopted differently based on product specification