![background image](http://html1.mh-extra.com/html/daelim/bonita-catalog/bonita-catalog_owners-manual_3162495040.webp)
38
<REMOVAL>
①
Loosen the 6 washer screws and 1
flange bolt, and remove the tube clip
and air cleaner case cover.
②
Inspect the air cleaner element.
③
If the air cleaner element is
excessively dirt or damaged, replace it
with a new one.
A rubber boots is assembled on the cable
to protect the inner cable.
Make sure that this part is placed firmly
around the correct part of the cable. When
washing the vehicle, do not directly spray
water on to the rubber boots or scrub it
with brush. Use a dry cloth to clean this
area.
Check the installing condition of rubber
boots daily. After adjusting the free play
of throttle grip, never forget to place the
rubber boots to the original position.
AIR CLEANER ELEMENT INSPECTION
CAUTION
●
If the air cleaner element is
inadequately assembled, dust and
other waste materials can directly
enter the engine. This results in
increased cylinder wear and reduced
power, and reduced durability of the
engine.
●
When washing the vehicle, be
careful not to allow water to get into
the air cleaner. Difficulties in
starting the engine may result if this
happens.
●
If the engine start is failed during
rain or after driving across water
pool, check to see if the water is
infiltrated in the air cleaner and clean
it.
●
Do not drive in the flooded area. If
the water enters the air cleaner or
engine, the vehicle may be subjected
to the rear-end collision due to the
power failure.
CABLE RUBBER PART
Summary of Contents for BONITA - CATALOG
