Customer Installable Parts
Upper Cargo Structure & Bag
e Series and i Series Models Only
Kit Number: 1689500001
Contents
· 1 handlebar bag
· 1 bag lid
· 1 wire mounting frame
· 1 control shaft clamp
· 1 clamp screw
· 2 button head screws
Specifications
· 10 lb. maximum carrying capacity
· Polypropylene and polyethylene construction
· Polyester and mesh soft-sided pockets with cord locks
· Stainless steel snaps on bag lid
· Hook and loop attachment straps
· Powder-coated stainless steel wire mounting frame
Tools Required
· 2.5mm hex wrench
· 4mm hex wrench
WARNING
Always shut down your Segway HT and unplug the charge cord before performing any maintenance or installing any part or
accessory.
Follow these instructions carefully. Failure to follow these instructions carefully could damage your Segway HT and render it
unsafe to use.
Before you begin:
Do not use the parking stand to support the Segway HT while performing this procedure. The parking stand
is not designed to withstand the forces that may be generated. Instead, lay the Segway HT down on its back
side or support it with other objects so that you have easy access to the front of the handlebar and control
shaft.
