34
<REPLENISHING>
1. Erect main stand and place motorcycle
in upright position on level ground.
2. Open the seat.
3. Turn the oil cap counterclockwise, and
remove it.
4. Fill the oil tank to the fill level.
5. Turn the oil cap clockwise, and install
it.
6. Close the seat. Check to see if the seat lock
has latched.
[RECOMMENDED OIL]
MOTIX 2 (for 2 cycle)
If a synthetic (non-pure) oil is used,
engine life is adversely affected, and the
privilege of warranty repairs cannot be
guaranteed.
●
Start the engine and let it idle for a few
minutes.
●
Stop the engine and put the motorcycle
on its mainstand on level ground.
●
Check to see if transmission oil leaks
out of the transmission case.
●
Fill the recommended oil when you
need.
CAUTION
●
When refueling, make sure not to enter
the dirt into oil pouring port.
●
If the oil overflows, wipe it clearly.
●
Do not fill the oil past the level plate.
●
If a synthetic(non-pure) oil is used,
emissions will exceed environmental
standards, only use a pure oil.
OIL TANK CAP
TRANSMISSION OIL INSPECTION
OIL CHECK BOLT
CHECK BOLT HOLE
TRANSMISION OIL
OIL HOLE
Summary of Contents for BONITA - CATALOG
