DAELIM BONITA - CATALOG, Owner'S Manual

Page: 41 / 68

If electrode is stained or clearance is not
right, satisfactory spark is not produced.
Clean and make adjustment.
●
Remove the spark plug cap.
●
Clean around the plug.
●
Using a plug wrench, remove the plug.
●
Clean plug with plug cleaner.
●
Check electrode for wear and
corrosion. If the ends become round,
replace it with a new one.
●
Check the plug gap using a feeler
gauge.
<PLUG GAP : 0.6~0.7mm>
●
Tighten with hands until the plug
washer touches cylinder head.
<STANDARD PLUG : BPR6HS>
●
If new plug is installed, turn 1/2 and
tighten using a plug wrench.
●
If plug is reused, turn 1/3~1/4 and
tighten.
39
RUBBER
LOCK NUT
WARNING
●
Infiltration of the foreign materials or
water caused by damage of rubber
boots (disengagement, tearing, etc.)
may cause freezing in winter season
resulting in faulty operation. It may
lead death or serious injury by
decreasing of sudden acceleration and
braking force due to engine rpm.
●
If any damage is found, replace with
the new on immediately.
SPARK PLUG
GAP
CHECK THE DAMAGE
OF WASHER
CHECK GAP,
POLLUTION AND
SOOT
CHECK CRACK
PLUGCAP
SPARK PLUG