Daedong 3F183T Manual Download Page 44

Page: 44 / 66

-1

CRDI ENGINE

BATTErY (OpTIONAL)

Use only a genuine filter. Use

of a non-recommended filter

can cause damage to the en-

gine and sensor.
Make sure that no dust enters

the system by installing the

cover firmly.
When removing the filter, be

careful not to let foreign mate-

rial enter the air inlet.

•

CAuTION

TE4O510A

(1) Red Lead (+)

(2) Ground Lead (-)

(3) Battery Case

Mishandling the battery shortens the

service life and adds to maintenance

costs. If the battery is insufficiently

charged, the headlights may dim and

the engine is hard to start. It is impor-

tant to inspect the battery periodically.

1. The battery cable should always be

clean and firmly connected. When

installing a new or used battery,

clean its terminals and the end of

the cable.

2. Check the battery and cable for

damage and corrosion.

3. Apply grease to the terminals and

cable end in order to prevent corr-

osion.

디젤엔진-현대중공업용-영문판-04.indd 16

2014-09-16 오전 8:36:13

Summary of Contents for 3F183T



































































Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands

Daedong 3F183T, Manual

Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands