Daedong 3F183T Manual Download Page 15

Page: 15 / 66

SAFETY PRECATIONS

3. Exhaust fumes are poisonous and

can cause illness, brain injury, or

even death due to lack of oxygen.

Therefore, operate the engine

where there is good ventilation and

there are no people or cattle.

4. Don't operate

CRDI

engines in a

place where may be combustible

vapors. Responsibility for operating

the engine safely in dangerous

places must be assumed by the

machine managers and workers

Use diesel fuel only. Never mix

gasoline or alcohol with diesel

fuel. Fuel mixtures will damage

the engine and may cause an

explosion.

6. Confirm that the engine is stopped

when repairing the machine,

performing maintenance work, or

refilling the fuel. Don't open the

caps of the radiator or auxiliary

tank while operating the engine or

just after the engine is stopped.

If opened, hot water is ejected,

which may cause burning injuries

to people around. Open the

radiator cap 10 minutes after the

engine is stopped.

7. Make sure that all drains and caps

are tightly closed and all fluid levels

are correct before starting. Always

check for leaks and ensure that

any loose parts are repaired before

operating the engine. Loose parts

are the operator’s responsibility

and may cause damage or injury

if ignored. Loose parts are the

operator’s responsibility and may

cause damage or injury if ignored.

051O102B

051O103B

디젤엔진-현대중공업용-영문판-01.indd 3

2014-09-12 오전 11:59:33

Summary of Contents for 3F183T



































































Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands

Daedong 3F183T, Manual

Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands