Daedong 3F183T Manual Download Page 41

Page: 41 / 66

-1

MAINTENANCE

COOLANT SpEC

An antifreezing solution

(Ethylene glycol) + Pure water (50:50)

INSpECTION FOr EXCESSIVE

1. Clean the areas between the

radiator grill (Screen) or radiator

fins and tubes thoroughly.

2. If necessary, adjust the fan belt

again. (For detailed information,

see page 4-18.)

3. If the radiator pipe is clogged by

slime, clean the pipe with radiator

cleaner.

4. Coolant (Radiator cleaner and

anti-freeze)

CLEANINg rADIATOr COrE

1. Check that the radiator hose is

firmly tightened at every 600 hours

of operation.



If the clamp band is loose or it
leaks, tighten it securely.



If the radiator hose is swollen,
hardened or cracked, replace it

with a new one and fix it with the

band firmly.

2. Replace the hose and clamp every

two years. If the hose becomes

swollen, hardened or cracked

before that, replace it with a new

one immediately.

Remove dirt between the radiator

fins and tubes with water thoroughly.

CHECKINg rADIATOr HOSE

디젤엔진-현대중공업용-영문판-04.indd 13

2014-09-16 오전 8:36:11

Summary of Contents for 3F183T



































































Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands

Daedong 3F183T, Manual

Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands