Daedong 3F183T Manual Download Page 37

Page: 37 / 66

MAINTENANCE

1. Park the machine on a flat sur

face.

2. Check the engine oil before starting

the engine or wait 5 minutes or more

after the engine has stopped.

3. To check the oil level, draw out the

oil gauge, wipe it clean, replace it,

and draw it out again.

Check to see that the oil level is

between the two notches. If the

level is too low, add new oil to the

prescribed level at the oil inlet.

CHECKINg ENgINE OIL LEVEL

(1) Oil Inlet

(2) Oil gauge

(A) Oil level is acceptable within this range.

TE4O504A

Model

Capacity

3F183T

1.5 U.S.gal. (5.8 L)

4F243T

2.6 U.S.gal. (9.7 L)

3FT-HI4

1.6 U.S.gal. (6.0 L)

4. Engine oil capacity

5. Use SAE 15W-30CJ oil or equiva-

lent. Use API CJ grade above. (See

the lubricants spec of page 4-4)

When using oil of a different

brand or viscosity from the

previous one, remove all of

the old oil. Never mix two dif-

ferent types of oil.
Do not start the engine if the

amount of oil is insufficient.

•

IMpOrTANT

To avoid personal injury:

Be sure to stop the engine be-

fore checking the oil level.

•

CAuTION

디젤엔진-현대중공업용-영문판-04.indd 9

2014-09-16 오전 8:36:08

Summary of Contents for 3F183T



































































Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands

Daedong 3F183T, Manual

Search results

Summary of Contents for 3F183T

Reviews:

Related manuals for 3F183T

Brands by name

Popular brands