background image

1

WARNINGS:

1.  Read all instructions before 

using the appliance.

2.  This appliance must be 

grounded. Connect only to a 

properly grounded outlet. See 

“Grounding Instructions”.

3.  Install or locate this appliance 

only in accordance with these 

installation instructions.

4.  Use this appliance only for 

its intended use as described 

in this manual. Do not use 

corrosive chemicals or vapors 

in this appliance. 

5.  As with any appliance, close 

supervision is necessary 

when used by children.

6.  Do not operate this appliance 

if it has a damaged electrical 

cord or plug, if it is not 

working properly or if it has 

been damaged or dropped.

7.  This appliance should be 

serviced only by qualified 

service personnel. Contact the 

nearest DACOR Authorized 

Servicer at (800) 772-7778, 

or at www.dacor.com for 

examination, repair or 

adjustment.

8.  Do not cover or block any 

openings on the appliance.

9.  Do not store or use this 

appliance outdoors, execpt 

as noted below. Do not use 

this product near water – for 

example, near a kitchen sink, 

in a wet basement or near a 

swimming pool, etc.

10.  Do not immerse the electrical 

cord or plug in water.

11.  Keep the electrical cord away 

from heated surfaces.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for Wine Steward/Beverage Cooler









Reviews: