background image

IMPORTANT 

1.  Before beginning installation, please thoroughly read and become familiar with these instructions. 

2.  Installation and service must be completed by a qualified installer or service agency.

3.   Installer: Please leave these Installation Instructions with the owner.

4.   Owner: Please keep these instructions for local electrical inspector’s use and for future reference.

5.  Read the accompanying Use & Care Manual prior to operating this appliance.

TABLE OF CONTENTS

Verifying package contents 

Page   2

Installation planning 

Page   2

Overall dimensions 

Pages 2

Cabinet preparation 

Page   3

Electrical power supply requirements 

Page   3

Staining wood drawer fronts 

Page   4

Reverse door swing 

Page   4

Applying Dacor Nameplate 

Page   4

Installing Toekick 

Page   4

Leveling   

Page   5

Connecting to Electric Power 

Page   5

Slide into Cutout 

Page   5

Verifying proper operation 

Page   5

Part No. 65423  Rev. A

TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI/UL 858-2001 AND CAN/CSA-C22.2 NO. 64 

STANDARD FOR HOUSEHOLD ELECTRIC COOKING AND LIQUID HEATING APPLIANCES.

NOTES: 

 

Contain helpful hints and tips to facilitate the installation.

CONVENTIONS USED IN THESE INSTRUCTIONS

WARNINGS:

 

Must be followed carefully to avoid personal injury or damage.

SAVE AND READ THESE INSTRUCTIONS

Installation Instructions

Wine Steward/Beverage Cooler

Summary of Contents for Wine Steward/Beverage Cooler









Reviews: