12
Side Panel Removal
(Model DR30GIS/DR30GIFS only)
If the range will be installed with the partial side panels
removed:
1. Remove the three screws just below the oven opening
that hold the kick panel in place.
2. Pull the kick panel straight out to snap it off of the
range.
3. Remove the three screws that hold the side panel in
place as shown.
4. Push the side panel toward the back of the range to
snap it out of the control panel and remove it.
Installation Instructions
Door Removal
Remove the door to make the range easier to move during
the installation process.
WARNING
•
Do not attempt to disengage the hinge catches with
the door removed from the oven. The hinge springs
could release causing personal injury.
•
Do not lift or carry the oven door by the door handle.
1. Open the door to its fully opened position.
2. Use a flat blade screwdriver to rotate the catch over the
retaining arm on both hinges.
3. Lift the oven door to about a 15° angle from the vertical
position.
4. Hold the door with both hands just below the handle.
Pull the door up and away from the oven.
Door Gripping Points
Retaining arm
Catch
NOTE:
Handle
style varies
