Dacor Discovery series Installation Instructions Manual Download Page 10

Page: 10 / 24

Built-in Installation with Custom Side Panel

• A custom side panel is necessary when the refrigerator

is installed at the end of a cabinet run. The side panel

covers the side of the refrigerator chassis.

• The required depth of the side panel is the same as the

depth of the cabinet on the opposite side of the unit.

• A support board is mounted to the wall behind the

refrigerator. It will act as a bracket to attach the custom

side panel to the wall behind the refrigerator.

• The refrigerator is shipped with the side trim pieces pre-

installed. These trim pieces have screw holes that allow

the unit to attached to the cabinet and side panel using

1/8” diameter wood screws.

• See tables on this page for cutout dimensions.

Cabinet Cutout with Side Panel (Front View)

Installation Specifications

Cutout tolerances: +1/16” -0 (+1.6 mm)

Area to be left clear for the anti-tip brackets

Recommended electrical outlet location

Recommended water supply location

Minimum Cabinet Depth:

23 7/8 in (60.6 cm)

Models

(B) Cabinet

Width for Built-In

Installation

(C) Minimum

Cabinet Height

DYF30BFBPL

DYF30BFBPR

DYF30BFBSL

DYF30BFBSR

29 5/8 inches

(75.2 cm)

84 inches

(213.4 cm)

DYF30BFTSL

DYF30BFTSR

29 5/8 inches

(75.2 cm)

84 inches

(213.4 cm)

DYF36BFBPL

DYF36BFBPR

DYF36BFBSL

DYF36BFBSR

35 1/2 inches

(90.2 cm)

84 inches

(213.4 cm)

DYF36BFTSL

DYF36BFTSR

35 1/2 inches

(90.2 cm)

84 inches

(213.4 cm)

Installation inside a cabinet of this width allows the

refrigerator trim to be attached directly to the surrounding

cabinets.
This width is the minimum that must be kept when the side

trim is removed to allow for proper ventilation.

Installation in cabinets of this height requires that the back

of the cabinet be ventilated through the top. Otherwise,

a 2-inch height increase in cabinet height is required for

adequate ventilation

5 1/2 in (14 cm) 5 1/2 in (14 cm)

4 in (10 cm)

Cabinet

Custom Side Panel

Built-in Installation with Custom Side Panel

Built-in Installation with Custom Side Panel (Top View)

Support board

cabinet

Side trim attached

side panel

cabinet

Summary of Contents for Discovery series

























Search results

Summary of Contents for Discovery series

Reviews:

Related manuals for Discovery series

Brands by name

Popular brands

Dacor Discovery series, Installation Instructions Manual

Search results

Summary of Contents for Discovery series

Reviews:

Related manuals for Discovery series

Brands by name

Popular brands