PAGE
7
/
53
Stop weighing process, under Packer Mode, only.
Set the Low value or Check the current value.
- Press key and enter new set value with keypad, and press enter to save
Set the Hi value or Check the current value.
- Press key and enter new set value with keypad, and press enter to save.
Set “Free Fall” value for “HI” set point
I
f you set the “Free Fall”, “HI” relay output will be “ON” in advance,
according to “Free Fall” set value.
Manual Printer
- Key input, print output.
Calibration mode
- Digit setting
Whenever pressing “0”key, digit will be change 1, 2, 5, 10, and 50.
1. Modify the set value during setting process.
2. Calibration mode
- Move back to previous step.
3. F-function setting mode
- Change F-function No.
F-function no.(number key) + Clear
directly move
1. Save set value during setting process.
2. Calibration mode
- Save current setting and move to next step.
3. F-Function mode
- Save current F-function setting, and move to next F-function
