PAGE
11
/
53
Chapter 5. Set Up
5-1. Calibration
Adjust weight balance between “Real weight” on the load cell(Weight Part) and “Displayed weight of
Indicator”. When you replace LOAD CELL or Indicator, you have to do Calibration process once again
5-2. Test Weight Calibration (span Calibration)
– Mode 1.
- Applicable model : DN500N,510N,520N,530N,540N series
Prepare at least 10% of Max. capacity of your weighing scale.
Step 1. Enter Calibration Mode
Step 1. Enter Calibration Mode
Turn on the Power + with pressing
display
Press
key
display
Press
key to start “Calibration Mode”.
Remarks : Go to next step with save
key / Back to previous step
key
Step 2. Digit(Division)setting (
display)
Press
key and stop the optimal Digit value.
(Whenever pressing
key, digit value will be changed, like 01-02-05-10-20-50)
Press
key and save change and move to next step.
Step 3. Max. Capacity Setting (
display)
Input Max. Capacity of Scale with No. keys.
Input Capacity and press
key, and move to next step.
※
Caution
(Max. capacity value / division value)
can not be over
30,000
.(as Indicator resolution is 1/30,000).
XXXXXX
CAPA
d
_1
SET-CAL
TEST
