ENGLISH
47
The SET key is only for leaving the current menu and is not necessary for saving the changes made. Only in particular cases
described in chapter 0 are some values updated by pressing “SET” or “MODE”.
Menus
The complete structure of all the menus and of all the items of which they are composed is shown in Table 5.
Access to the menus
The various menus can be accessed from the main menu in two ways:
1.
Direct access with a combination of keys
2.
Access by name with a drop-down menu
7.1 Direct access with a combination of keys
The desired menu can be accessed directly by pressing simultaneously the appropriate combination of keys for the required time (for example
MODE SET to enter the Setpoint menu) and the various items in the menu are scrolled with the MODE key.
Table 4 shows the menus that can be reached with the combinations of keys.
MENU NAME
DIRECT ACCESS KEYS
HOLD-DOWN TIME
User
On releasing the button
Monitor
2 Sec
Setpoint
2 Sec
Manual
5 Sec
Installer
5 Sec
Technical assistance
5 Sec
Reset factory values
2 sec after switching on appliance
Reset
2 Sec
Table 4
Reduced menu (visible)
Extended menu (direct access or password)
Main Menu
User Menu
mode
Monitor Menu
set-minus
Setpoint Menu
mode-set
Manual Menu
set-minus-plus
Installer Menu
mode-set-minus
Tech. Assist. Menu
mode-set-plus
MAIN
(Main Page)
STATUS
BK
Back lighting
SP
Setpoint pressure
STATUS
RP
Decrease pressure
for restart
TB
Block time for
water lack
Menu
Selection
RS
Revs per minute
TK
Backlighting switch-on
time
RI
Speed setting
OD
Type of plant
T1
Low pressure delay
VP
Pressure
LA
Language
VP
Pressure
AD
Address Configuration
T2
Delay in switching off
VF
Display of flow
TE
Heat sink
temperature
VF
Display of flow
MS
Measuring system
GP
Proportional gain
PO
Power absorbed by
pump
BT
Card temperature
PO
Power delivered to
the pump
AS
Wireless devices
GI
Integral gain
