Da-Lite ViewShare, Instruction Book

Page: 6 / 20

6
Transfer of Existing Motor (continued)
Figure 12
5. Completely remove both shipping brackets from the board.
6. Remove the three Phillips head screws from motor end bracket
and remove wooden block (Figure 12).
7. On the ViewShare screen and roller assembly, loosen (but do not
remove) the nut on the motor end arm bracket (Figure 13).
8. Remove the two end bracket bolts securing the motor end bracket
to the shipping board. Slide the bracket away from the end while
supporting the roller (Figure 13).
Phillips
Head
Screws
Figure 13
Motor
End Arm
Bracket
Nut
End Bracket Bolts