7
Cleaning
All surfaces can be cleaned as follows: Using a white clean cloth
(100% cotton preferred) that is dampened with clear water,
gently wipe the area in one direction. Do not use a circular
motion. Using a dry 100% cotton cloth, wipe dry after each
cleaning session.
To clean a stubborn stain or a sticky surface, all surfaces except
High Power® and Silver Lite 2.5 can be cleaned using denatured
alcohol (methanol or methyl alcohol) following the same
procedure as for water.
Assembling Fabric to Frame
1. Drape top of fabric over the Da-Snap frame. It will wrap around
over the top of the frame.
2. Start the top by snapping the double corner snaps on first.
These are located at the ends of the fabric.
3. Begin snapping the fabric across the top of the frame.
NOTE:
When snapping near the hanging brackets the binding
will need to be tucked in between the frame and the bracket.
4. Stretch the fabric across the frame and wraparound the
bottom of the frame.
5. Start the bottom by snapping the double corner snaps on first.
These are located at the ends of the fabric.
6. Begin snapping the fabric across the bottom of the frame.
NOTE:
When snapping near the hanging brackets the binding
will need to be tucked in between the frame and the bracket.
7. Start wrapping one of the sides around the frame. Make sure
to tuck in the top and bottom corner flaps and then wrap the
material around to capture the corner flaps. Snap on top &
bottom corner to double snap.
8. Repeat step 7 for other side of frame.
9. Return to install instructions.
Double Snap
on Corner
Tuck Fabric
Between
Frame and
Bracket
Start Snap on
Double Cap
Side
Flap
Wrap Around
Side of Fabric
CAUTION!
Tear Point
at Corner
