6
Method 3 for Screens with a Viewing Width over 96"
1. Use the supplied #10 screws to attach six frame brackets to the
back of the frame as shown in Figure 8.
2. Secure the wall brackets to wall studs at the desired height. Make
sure the brackets are level. The top of the frame will be 1/8" above
the top of the wall bracket when mounted. You will need at least
5/8" clearance above the bracket to hang the screen.
3. To install the lower wall bracket, you must measure the overall
height of the screen frame and subtract 1/4". This is the
dimension from the top of the upper wall bracket to the bottom
of the lower wall bracket. See Figure 6.
4. For screen 90" high viewable and over and larger screens with
2-piece side frame rails you will need to attach one side frame
bracket to each side frame rail. Use the black #10 screws supplied.
See Figure 8.
Figure 8
Frame Brackets
6-Pieces
#10 Screws
12-Pieces
Large Wall
Brackets
3-Pieces
NOTE:
Use provided gloves for steps 5 and 6.
5. Attach surface to screen using instructions on page 6.
6. Position the screen with the attached surface onto the top wall
bracket as shown in Figure 7. Gently push down at the center of
the bottom frame rail to hook onto the lower wall bracket.
NOTE:
Pushing down too hard on the frame to seat brackets
may cause damage to the screen surface.
7. If you attached brackets to the side frame rails in step 4,
anchor these to the wall with an appropriate fastener for
your type of wall.
Side Frame Bracket For 90" high viewable and
larger screens and Large Split Frames (2-Pieces)
