5
Method 2 for Screens with a Viewing Width of 80" to 96"
1. Use the supplied #10 screws to attach four frame brackets to the
back of the frame as shown in Figure 5.
2. Secure the wall bracket to wall studs at the desired height. Make
sure the bracket is level. The top of the frame will be 1/8" above
the top of the wall bracket when mounted. You will need at least
5/8" clearance above the bracket to hang the screen.
3. To install the lower wall bracket, you must measure the overall
height of the screen frame and subtract 1/4". This is the
dimension from the top of the upper wall bracket to the
bottom of the lower wall bracket. See Figure 6.
4. Attach surface to screen using instructions on page 6.
NOTE:
Use provided gloves for steps 5 and 6.
5. Position the screen with the attached surface onto the top wall
bracket as shown in Figure 7. Gently push down at the center of
the bottom frame rail to hook onto the lower wall bracket.
NOTE:
Pushing down too hard on the frame to seat brackets
may cause damage to the screen surface.
Figure 5
Frame Brackets
4-Pieces
#10 Screws
8-Pieces
Large Wall
Bracket
2-Pieces
Figure 6
W
all
2
1
W
all
Figure 7
Overall Height - 1/4"
Overall Height