Chapter 2
Signal flow
This chapter describes the signal path through Toraverb. It explains the basic components of
the unit and its control parameters. Basic modules.
2.1
Basic modules
Internally Toraverb consists of a few basic components. These correspond to the sections on
the graphical user interface:
Early reflections
- This section controls the early reflections of reverb.
Figure 2.1: Early reflections
There’re three parameters to control this section:
Size
- Size of the room for early reflections only.
Diffusion
- It’s the reflecting surface’s ability to spread the echo out. If this parameter
is set to
Sharp
, reflecting surface is perfectly flat and doesn’t distort reflected wave.
In a case of setting this value to
Smooth
, reflecting surface distorts wave and spread
out into different directions.
Attenuation
- This parameter changes the characteristic of the wall’s surface, its dump-
ing properties.
2
Summary of Contents for Toraverb 1.2.0
Page 20: ......
