Chapter 2. Signal flow
2.1. Basic modules
Attenuation
- This parameter changes the characteristic of the wall’s surface, its dump-
ing properties.
Bass cut
- It’s another parameter, that controls other property of reflecting surface;
what frequencies below the set one are absorbed by the surface. We can choose
frequency from the range: [0
H z . . .
22
kH z
]
Decay time
- It shows the current decay time of the whole reverberation path. Following
parameters have influence on decay time:
•
Early reflections:
Size
,
•
Early reflections:
Diffusion
,
•
Late reflections:
Size
,
•
Late reflections:
Diffusion
,
•
Late reflections:
Feedback
Attenuation
parameters for early and late reflections have also effect on
Decay
time
, but it’s not taken into account for calculations.
Late EQ
- Single peak parametric EQ for late reflections’ output:
Figure 2.4: Late reflections - Parametric EQ
It’s controlled within following parameters:
Frq
- Centre frequency of a peak.
Gain
- Gain value for a band [
−
24
dB . . .
24
dB
].
Bw
- Width of the band [4
octaves . . .
0
.
5
octave
].
Master section
- There’re global reverberation parameters
4
Summary of Contents for Toraverb 1.2.0
Page 20: ......
