Chapter 2. Signal flow
2.1. Basic modules
Early EQ
- Single peak parametric EQ for early reflections’ output:
Figure 2.2: Early reflections - Parametric EQ
It’s controlled within following parameters:
Frq
- Centre frequency of a peak.
Gain
- Gain value for a band [
−
24
dB . . .
24
dB
].
Bw
- Width of the band [4
octaves . . .
0
.
5
octave
].
Late reflections
- Parameters controlling the late reflections of reverb.
Figure 2.3: Late reflections
Size
- Size of the room for late reflections only.
Diffusion
- It’s the reflecting surface’s ability to spread the echo out. If this parameter
is set to
Sharp
, reflecting surface is perfectly flat and doesn’t distort reflected wave.
In a case of setting this value to
Smooth
, reflecting surface distorts wave and spread
out into different directions.
Feedback
- Controls how much of wave energy is consumed every reflection. The less
value the more energy consumes every reflection, that means the feedback is weaker
then.
3
Summary of Contents for Toraverb 1.2.0
Page 20: ......
