background image

21 

 

WARRANTY

 

• 

D.T.  Systems Premium  Lifetime Warranty is  the  best  warranty  offered 
in the industry.  This warranty is free to participating U.S. customers (a 
completed  warranty  registration card  must  be  returned  within  30  days 
of  original  purchase).    This  changes  our  normal  one  year  parts  and 
labor  warranty  to  a  limited  lifetime  warranty  against  manufacturing 
defects on parts and a one year warranty on labor. 

 

How the Limited Lifetime Warranty works: 

• 

To  qualify  for  the  Warranty  you  must  fill  out  the  warranty  registration 
card which came with your system and mail it (with your original sales 
receipt) to D.T. Systems within 30 days of purchase. 

• 

Your unit must be sent to D.T. Systems for all warranty issues. 

• 

There  is  no  charge  for  parts  or  labor  for  the  first  year  on  any  of  our 
lifetime warranty products. 

• 

When the product’s labor warranty expires after the first year, there will 
be  a  normal  labor  charge  for  any  repair  under  the  lifetime  warranty 
program should your system be in need of service.  Labor charges will 
vary  depending  on:    1)  the  system  model  and  2)  the  severity  of  the 
repair needed. 

• 

When  your  unit  is  sent  in  for  repairs,  any  defective  part(s)  that  need 
replacement will be free during the lifetime warranty period. 

  

What is covered:    

D.T.  Systems  Premium  Lifetime  Warranty  covers  all  parts  to  be  free  from 
manufacturing defects for as long as the unit is held by the original owner. 

  

What is not covered: 

• 

Rechargeable  batteries  have  a  one  year  warranty  from  the  original 
purchase date and are not part of our lifetime warranty. 

• 

Lost  parts  or  parts  that  malfunction  due  to  abuse,  misuse,  improper 
maintenance, or incorrect handling are not covered.  

• 

Damage from dogs chewing or wear and tear from excessive field use 
is not covered. 

• 

Our warranty does not cover the cost of shipping the unit to our repair 
center.    Return  ground  shipping  (inside  the continental  United  States) 
to the customer is covered.  However, expedited or special shipping is 
not  covered,  but  available  by  request  for  an  extra  shipping  fee.  
International shipping charges are not covered.

 

Summary of Contents for RedHead RH Pro 1000

























Reviews: