9
Battery Installation Procedure
1. Make sure the Collar Unit is not on
the dog.
2. Remove the two screws holding the
Battery Cover with a small Phillips
screwdriver to remove the cover.
3. Remove the depleted battery.
4. Insert the new battery in the proper
direction, paying attention to
diagram in the battery compartment.
5. Make sure the rubber seal is properly in place and
replace the Battery Cover and screws. Do not over-
tighten the screws as it may crack the plastic.
6. Test unit (see
page 15
).
TRANSMITTER PARTS & FUNCTIONS
Camo Battery Cover (Back of Transmitter)
- Covers
battery and battery compartment. Held by 2 small
Phillips screws. Make sure the battery is inserted in
the proper direction. Do not over-tighten the screws or
you may crack the plastic.
Lanyard Connection
- Attachment point for lanyard.
INSTALLING TRANSMITTER 9V BATTERY
The
RH Pro 1000
transmitter uses a 9-volt battery (not
included). We recommend using a name-brand
battery. The Transmitter may not operate properly
with a generic brand battery.
CAUTION -
Remove battery when storing unit.
Summary of Contents for RedHead RH Pro 1000
Page 1: ...Manufactured by RedHead RH Pro 1000 With SmartLED Owner s Manual ...
Page 4: ...4 ...
Page 23: ...23 ...
