D-MAX DMC Series, User Manual

Page: 8 / 24

8
3) AUTO ext : TDN lens Auto trace white balance.
It can be changed in AWC mode only.
4) Preset
: when the set color temperature doesn’t meet with user’s environment.
7. DNR
Set up 3D-DNR (Digital Noise Reduction) level.
▶
OFF, LOW, MIDDLE, HIGH
8. IMAGE
1) SHARPNESS (1~10)
Select the resolution of the camera.
2) GAMMA ( 0.45,0.55,0.65,0.75)
Select the GAMMA
3) COLOR GAIN (1~20)
Adjusts COLOR GAIN
4) MIRROR (ON/OFF)
Set up the screen mirror
5) FLIP (ON/OFF)
Set up the screen flip
6) D-ZOOM (1X~16X)
Enlarge the screen with DIGITAL ZOOM.
7) ACE (OFF/LOW/MIDDLE/HIGH)
Select Digital ACE(Advanced Enhance) level
8) DEFOG (OFF/MANUAL/AUTO)
This function does a process of clearing blurred image
caused by fog and snow by analyzing the brightness of
input image and compensating the color of the image.
Select defog level.
9) SHARDING
Set the lens shading.
When you maximize zoom ratio and lens angle of view
is saturated on screen, set to ON to make the lens edge
invisible.
It might happen only if fluorescent light is shined fully on
screen.
10) PRIVACY
The function is used to configure up to 16 privacy masks, where the scene is prohibited or
undesired to be viewed.
And you can also make polygon type privacy mask up to 8 areas.