D-MAX DMC Series, User Manual

Page: 4 / 24

4
■
1/3" 2MEGA SONY CMOS
High definition 12-bit digital image signals offering 2 mega pixels
are obtained with high speed of 30 fps and with low power consumption.
■
High Resolution 1100(Color)/(BW) TV Lines
This camera has realized high resolution of 1100(Color)/(BW) TV lines using the top-notch
full digital image processing, 12 Bit A/D serial signal processing and special algorithm
technologies.
■
DNR (Digital Noise Reduction, 2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear image.
This camera DNR function utilizes both an adaptive 2D filter reducing noise in the
brightness of the image and an adaptive 3D filter reducing caused by movement.
■
DAY&NIGHT (Output the Filter changing signal)
This camera has the Day&Night function which outputs the filter changing signal with
detecting the illumination condition.
■ SMART IR
Brightness of IR and saturation phenomenon are automatically adjusted.
■
OSD (On Screen Display)
This camera supports the OSD function which is used with multi language. And so, the
camera can be controlled bye selecting text displayed on the monitor screen.
■
Privacy Mask Function (16 points)
Privacy masking allows for the 'blanking' of specific areas of a scene, where the
viewing or recording of images is prohibited or undesired.
The technology of this camera allows for the user defined setting of a four point
polygonal mask, which is overlaid onto the video signal output.
■
Support both HD-SDI and EX-SDI
This camera can be used HD-SDI mode or EX-SDI mode. The default is HD-SDI mode.
And you can change mode to EX-SDI mode by using OSD button.
■
POC (Power of Coaxial)
This camera support POC function which enables to transfer power of the camera through
coaxial cable.
Features
☞
How to change mode from HD-SDI to EX-SDI.
Press
“Up” button for 3 seconds and then press “Set” button.
If you want to change HD-SDI mode again, press
“Down” button for 3seconds and
then press
“Set” button.