D-MAX DMC Series, User Manual

Page: 11 / 24

11
CAMTITLE
Camera TITLE display ON/OFF
Set Camera TITLE.(up to 8 characters)
A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,
0,1,2,3,4,5,6,7,8,9
VERSION
Camera VERSION display
11. Exit
SAVE : All the settings of the internal OSD menu are saved.
RESET : All the internal OSD menu settings are reset
☞
Caution
What’s POC
POC(power over coaxial) provides camera power through coaxial cable remotely, so
there’s no need of power cable installation.
Please be advised that following guidelines before you go with POC
- You should use the POC device our D-MAX team offer
- Make sure to use power voltage in accordance with more than 19V 1A
- Non-IR camera gets its power supply from POC device up to 300m
-
IR camera’s maximum transmission distance depends on the number of LED.
(24IR camera : max 150m / 30IR or 36IR camera : max 100m / 54IR camera : Max
80m)
- Transmission distance can vary slightly depending on the nature of cable and some
preferential cables are as follows.
(ECX5C cable can be favorable when POC is used. 5CHFBT would help a lot when
only power is transmitted.)
What’s EX-SDI
EX-SDI(Extended Serial Digital Interface) IS the new transmission technology that
remedies existing HD-
SDI system’s shortcomings
EX-SDI accompanies 2 times longer transmission distance compared to HD-SDI.
300m transmission distance is guaranteed by using 5CHFBT, ECX5C2V and RG59 but it
differs from cable manufacturer to manufacturers