2Mega HD-SDI Speed Dome Camera User manual
34
- ALARM CH On/Off : Alarm Input
– Each channel can be ON/OFF.
- According to signal connection, user can select ACTIVE OPEN(N/C) or ACTIVE CLOSE(N/O).
- If the user selects ACTIVE OPEN, it is activated when Alarm input is open, if the user selects ACTIVE
Close, it is activated when Alarm input is Close
- Resume Time Set :
It can select the delay time that the camera move to the place alarming to observe where wrong signal
is sensed.
User can set it for 1sec to 180sec and operate GROUP, TOUR, SWING again in a preset time. SWING,
GROUP, TOUR are operated in a preset time when user stops the operating joystick in the case of not
connecting with the ALARM
5. ALARM PRESET SET
- The camera can move to a preset point automatically when the wrong signal is sensed in each ALRAM
CHANNEL.
- Set a preset point firstly to move, if wrong signal is sensed, then use that sets the preset number into
each ALARM CHANNEL.
- Select ALARM Channel
“OFF” and doesn’t move relevant preset point
- User can select PRESET Point number 1 to 250 and set it.
■ Home Position Preset
- The camera automatically moves to where master user set, when another user controls the camera to
observe other area. (Enable to set 1~250 points.)
This Icon is displayed in the screen when it is set Resume Time.
When Resume time is set, it is not enable to set PRESET, GROUP, TOUR or SWING, If the user want
to set the function, Resume time function have to be “OFF” then the user can set the desired function.
- SPECIAL SET.
1. OSD DISPLAY
: ID+STATUS
2. SELECT ALARM
: SENSOR
3. MOTION DETECTION
: OFF
4. ALARM CHANNEL ON/OFF.
5. ALARM PRESET SET
6. AUTO REFRESH TIME : 3 Day
7. NEXT MENU PAGE.
8. RETURN TO MAIN PAGE.
JOYSTICK U/D/L/R TO SELECT.
- ALARM PRESET SET.
CH 01:
001
CH 02: 002
CH 03:
003
CH 04: 004
HOME POSITION PRSET
: 001
HOME POSITION TIME
: OFF
PREVIOUS MENU PAGE.
