2Mega HD-SDI Speed Dome Camera User manual
16
3. DIP switch setting
3.1. DIP
Switch
setting
-
Termination Resistor (DIP S2/SW1)
-Turn the last camera on the data line as a
switch to turn on/off the terminal resistor on.
Turn the DIP SW of some of the farthest
cameras on in the case of the data lines
distributed to several directions.
* The default is off.
-Address / Initial Select (DIP S2/SW2)
Set ADDRESS DIP SW in the status of ADDRESS
(*Reference to next page*)
(.*** The first default is ADDRESS.**)
-Set the communication speed (baud rates) and
Protocol (Demand for the technical inquiry) up in
the state of the INITAIL.
-Select PAL / NTSC system (DIP S2/SW 3)
-Power On/Off (DIP S2/SW 4)
Set DIP SW only in the status of Power off.
Then turn on the power after setting DIP SW.
