Vitek VTC-TNB3RFE Quick Start Manual Download | Manualshive

Page: 1 / 12

background image

VITEK

VITEK

VTD-TNMD4RFS

Transcendent Series 4

Megapixel H.265 IP Dome

Camera with IR LED Illumination

QUICK START GUIDE

FEATURES

1/3” 4.0 Megapixel Progressive Scan CMOS image sensor
• Up to 30fps live view @ 4 MegaPixel (2592x1520)
• 2.8mm or 3.6mm Fixed Iris Lens Options
• 10 Infrared LED’s with 65’ IR Range
• 120dB Super Wide Dynamic Range (WDR)
• True Mechanical Day/Night function by ICR
• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction
• Fully Programmable Intelligent Analytics including Object Removal/

Museum Search, Line Crossing, and Area Intrusion Detection

• H.265/H.264/MJPEG Triple Streaming
• Secondary Video Output (CVBS)
• Remote Viewing via CMS, Internet Explorer, and iOS & Android

Apps

• ONVIF Compliant
• IP66 Weather Resistance & IK10 Impact Rating
• 12VDC & PoE (Power over Ethernet) Operation

PLEASE NOTE:

Complete User Guide, Software, Tools, and Updates are

available online. Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

1
2
3
...
»

Summary of Contents for VTC-TNB3RFE













Reviews:

No comments

Related manuals for VTC-TNB3RFE

GO!control 2GIG-CNTRL2

Brand: 2gig Technologies Pages: 52

GO!control 2GIG-CNTRL2

Brand: 2gig Technologies Pages: 52

Brand: Ganz Pages: 7

Brand: Ganz Pages: 8

Brand: Aurora Pages: 2

Brand: Doberman Pages: 6

Scopia XT Advanced

Brand: Avaya Pages: 2

Brand: Novus Pages: 36

Brand: jablotron Pages: 2

Brand: ADEMCO Pages: 40

Brand: NA-DE Pages: 7

Brand: Q-See Pages: 9

Brand: Zavio Pages: 16

Brand: wavestore Pages: 16

ELI-IP5-VD31-312MR

Brand: e-Line Technology Pages: 94

Brand: Velleman Pages: 4

Brand: DMP Electronics Pages: 6

Brand: Phottix Pages: 134

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands