xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
287
Idle Time
(1-1440 Minutes)
This parameter specifies the period of time during which there is no traffic for an
authenticated host and the host will be moved back to the unauthenticated state. Enter a
value between
1
and
1440
minutes. A value of Infinite indicates the Idle state of the
authenticated host on the port will never be checked. The default setting is Infinite.
Block Time
(0-300 Seconds)
This parameter specifies the period of time a host will keep in a blocked state after it fails to
authenticate. Enter a value between
0
and
300
seconds. The default setting is
60
seconds.
Click
Apply
to implement changes made.
JWAC User Account
This window is used to configure JWAC user accounts on the Switch.
To view this window, click
Security >
JWAC > JWAC User Account
, as shown below:
Figure 6 - 73 JWAC User Accounts window
To configure JWAC user settings, click the
Add
button, which will open the following window:
Figure 6 - 74 JWAC User Account Add Table window
The following fields can be configured:
Parameter Description
User Name
Enter a username of up to 15 alphanumeric characters.
VID(1-4094)
Enter the VLAN ID of the Account you wish to create.
New Password
Enter the password of the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirm New
Password
Retype the password entered in the previous field.
Click
Apply
to implement changes made.
To view JWAC user settings for the Switch, click the Hyperlinked
Show All JWAC User Account Entries
, to view the following
window:
