xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
260
To define an Enable Login Method List, set the following parameters and click
Apply
:
Parameter Description
Method List Name
Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4
The user may add one, or a combination of up to four of the following authentication methods
to this method list:
local_enable
– Adding this parameter will require the user to be authenticated using the local
enable password database on the Switch. The local enable password must be set by the user
in the next section entitled Local Enable Password.
none
– Adding this parameter will require no authentication to access the Switch.
radius
– Adding this parameter will require the user to be authenticated using the RADIUS
protocol from a remote RADIUS server.
tacacs
– Adding this parameter will require the user to be authenticated using the TACACS
protocol from a remote TACACS server.
xtacacs
– Adding this parameter will require the user to be authenticated using the XTACACS
protocol from a remote XTACACS server.
– Adding this parameter will require the user to be authenticated using the TACACS
protocol from a remote TACACS server.
server_group
– Adding a previously configured server group will require the user to be
authenticated using a user-defined server group previously configured on the Switch.
Click
Apply
to implement changes made.
Configure Local Enable Password
This window will configure the locally enabled password for the
Enable Admin
command. When a user chooses the
"local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the
password configured here that is locally set on the Switch.
To view this window, click
Security > Access Authentication Control > Configure Local Enable Password
, as shown below:
Figure 6 - 48 Configure Local Enable Password window
To set the Local Enable Password, set the following parameters and click
Apply
.
Parameter Description
Old Local Enable
If a password was previously configured for this entry, enter it here in order to change it to a
new password
New Local Enable
Enter the new password that you wish to set on the Switch to authenticate users attempting
to access Administrator Level privileges on the Switch. The user may set a password of up to
15 characters.
Confirm Local Enable
Confirm the new password entered above. Entering a different password here from the one
set in the New Local Enabled field will result in a fail message.
Click
Apply
to implement changes made.
