xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
185
The following parameters can be set, for the Ethernet type:
Parameter Description
Profile ID (1-6)
Type in a unique identifier number for this profile set. This value can be set from 1 to 6.
Type
Select profile based on Ethernet (MAC Address), IP, Packet Content or IPv6 address. This will
change the menu according to the requirements for the type of profile.
Select
Ethernet
to instruct the Switch to examine the layer 2 part of each packet header.
Select
IP
to instruct the Switch to examine the IP address in each frame's header.
Select
IPv6
to instruct the Switch to examine the IPv6 address in each frame's header.
Select
Packet Content
to instruct the Switch to examine the packet header.
VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
Source MAC
Source MAC Mask – Enter a MAC address mask for the source MAC address.
Destination MAC
Destination MAC Mask – Enter a MAC address mask for the destination MAC address.
802.1P
Selecting this option instructs the Switch to examine the 802.1p priority value of each packet
header and use this as the, or part of the criterion for forwarding.
Ethernet type
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
To view the settings for a created profile, click its corresponding
button in the
Access Profile Table
window, revealing the
following window:
Figure 5 - 4 Access Profile Entry Display window (Ethernet)
The window shown below is the
IP Access Profile Configuration
window:
