D-Link xStack Storage DSN-5210 Page 6 Hardware Reference Manual Download

Page: 6 / 48

Preface

Contact Information

You can find software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States and within
Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link Technical Support through our website, or
by phone.

Tech Support for customers within the United States:
D-Link Technical Support over the Telephone
Please see our support site for current number:



http://support.dlink.com



Monday to Friday 8:00am – 5:00pm PST/PDT

D-Link Technical Support over the Internet:



http://support.dlink.com

Tech Support for customers within Canada:
D-Link Technical Support over the Telephone
Please see our support site for current number:



http://support.dlink.ca



Monday to Friday 7:30am to 9:00pm EST/EDT

D-Link Technical Support over the Internet:



http://support.dlink.ca

Summary of Contents for xStack Storage DSN-5210

















































Search results

Summary of Contents for xStack Storage DSN-5210

Reviews:

Related manuals for xStack Storage DSN-5210

Brands by name

Popular brands

D-Link xStack Storage DSN-5210, Hardware Reference Manual

Search results

Summary of Contents for xStack Storage DSN-5210

Reviews:

Related manuals for xStack Storage DSN-5210

Brands by name

Popular brands