D-Link xStack Storage DSN-5210, Hardware Reference Manual

Page: 22 / 48

14 Chapter 3 Installing the DSN-5000 Series Primary Array
3.1 Site Considerations
The site where you install the DSN-5000 series primary array can affect its performance.
Therefore, choose a site that conforms to the requirements in the following sections.
3.1.1 General Considerations
Observe the following considerations when selecting a location to install the DSN-5000 series
primary array.

The location should be fairly cool and dry for the acceptable temperature and humidity
ranges.

The location should be free of strong electromagnetic field generators (such as motors),
vibration, dust, and direct exposure to sunlight.

The location must provide sufficient airflow to the front and back of the DSN-5000 series
primary array for correct cooling. Ventilation must be sufficient to exhaust heat from
the rear of the equipment.

The location should offer a power outlet within six feet (1.82 meters) of the DSN-5000
series primary array.

The location should allow for at least six inches (152.3 mm) of space at the front and
back of the DSN-5000 series primary array for ventilation.

Do not place the DSN-5000 series primary array next to, on top off, or below any device
that generates a significant amount of heat or will block the fee flow of air through the
DSN-5000 series primary array ventilation slots.
3.1.2 Desktop or Shelf Installation
The DSN-5000 series primary array can be mounted on a desktop or shelf. Observe the
following considerations for desktop or shelf installations.

Select a sturdy, level surface that can support the DSN-5000 series primary array. A fully
populated unit weighs approximately 85 lbs. (38.6 kg.).

Allow enough ventilation space between the DSN-5000 series primary array and any
other objects in the vicinity.

Be sure not to block the air vents on the front and back of the DSN-5000 series primary
array enclosure. Install the cables and power cords according to the procedures in the
following sections.