xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
308
Adding an Ethernet ACL Profile
The window shown below is the Add Egress ACL Profile window for Ethernet. To use specific filtering masks in this
egress ACL profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the
Add Egress ACL
button, the following page will appear:
Figure 7-49 Add Egress ACL Profile window (Ethernet ACL)
The fields that can be configured are described below:
Parameter
Description
Profile ID (1-4)
Enter a unique identifier number for this profile set. This value can be set from 1 to 4
.
Profile Name
Enter a profile name for the profile created.
Select ACL Type
Select profile based on Ethernet (MAC Address), IPv4 address, or IPv6 address. This
will change the window according to the requirements for the type of profile.
Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet
header.
Select IPv4 ACL to instruct the Switch to examine the IPv4 address in each frame's
header.
Select IPv6 ACL
to instruct the Switch to examine the IPv6 address in each frame's
header.
Source MAC Mask
Enter a MAC address mask for the source MAC address.
Destination MAC
Mask
Enter a MAC address mask for the destination MAC address.
802.1Q VLAN
Selecting this option instructs the Switch to examine the 802.1Q VLAN identifier of
each packet header and use this as the full or partial criterion for forwarding.
Summary of Contents for xStack DGS-3620-52P
Page 1: ......
