xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
432
Figure 11-9 TX Packets Analysis window (table for Bytes and Packets)
The fields that can be configured are described below:
Parameter
Description
Port
Use the drop-down menu to choose the port that will display statistics.
Time Interval
Select the desired setting between
1s
and
60s
, where "s" stands for seconds. The
default value is one second.
Record Number
Select number of times the Switch will be polled between
20
and
200
. The default
value is
200
.
Bytes
Counts the number of bytes successfully sent on the port.
Packets
Counts the number of packets successfully sent on the port.
Unicast
Counts the total number of good packets that were transmitted by a unicast address.
Multicast
Counts the total number of good packets that were transmitted by a multicast
address.
Broadcast
Counts the total number of good packets that were transmitted by a broadcast
address.
Show/Hide
Check whether or not to display Bytes and Packets.
Click the
Apply
button to accept the changes made for each individual section.
Click the
Clear
button to clear all statistics counters on this window.
Click the
View Table
Click the
link to display the information in a table rather than a line graph.
View Graphic
link to display the information in a line graph rather than a table.
Errors
The Web manager allows port error statistics compiled by the Switch's management agent to be viewed as either a
line graph or a table. Four windows are offered.
Received (RX)
To select a port to view these statistics for, select the port by using the Port drop-down menu. The user may also
use the real-time graphic of the Switch at the top of the web page by simply clicking on a port.
To view this window, click
Monitoring > Statistics > Port Statistics > Errors > Received (RX)
as shown below:
Summary of Contents for xStack DGS-3620-52P
Page 1: ......
