xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4# create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DGS-3400:4#
delete cpu access_profile
Purpose
Used to delete a previously created access profile or cpu access profile.
Syntax
delete cpu access_profile profile_id <value 1-5>
Description The
delete cpu access_profile
command is used to delete a previously created
cpu access profile.
Parameters
profile_id <value 1-5>
−
Enter an integer between 1 and 5 that is used to identify
the cpu access profile to be deleted with this command. This value is assigned to
the access profile when it is created with the
create cpu access_profile
command.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete the CPU access profile with a profile ID of 1:
DGS-3400:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DGS-3400:4#
config cpu access_profile
Purpose
Used to configure a cpu access profile used for CPU Interface Filtering and to define specific
values that will be used to by the Switch to determine if a given packet should be forwarded
or filtered. Masks entered using the
create cpu access_profile
command will be combined,
using a logical AND operation, with the values the Switch finds in the specified frame header
fields. Specific values for the rules are entered using the
config cpu access_profile
command, below.
Syntax
config cpu access_profile profile_id <value 1-5> [ add access_id <value 1-100>
[ethernet {vlan <vlan_name 32> | source_mac <macaddr> | destination_mac
<macaddr> | 802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff>} port [<portlist> | all] |
ip {vlan vlan_name 32> | source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value 0-
63> | [icmp {type <value 0-255> | code <value 0-255>} | igmp { type <value 0-255>} | tcp
{src_port <value 0-65535> | dst_port <value 0-65535> | flag [all | {urg | ack | psh | rst |
syn | fin}]} | udp {src_port <value 0-65535> | dst_port <value 0-65535>} | protocol_id
<value 0 - 255> {user_define <hex 0x0-0xffffffff>}]} port [<portlist> | all] [permit | deny] |
packet_content {offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> | offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>} port [<portlist> | all] [permit
| deny]] | delete access_id <value 1-100>]
Description The
config cpu access_profile
command is used to configure a cpu access profile for CPU
Interface Filtering and to enter specific values that will be combined, using a logical AND
operational method, with masks entered with the
create cpu access_profile
command,
163
