D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
12
Section 3
Introduction to Switch Management
Login to Web Manager
Web-based User Interface
Basic Setup
Switch Information
IP Address
User Accounts
Saving Changes
Factory Reset
Restart System
Introduction
All software functions of the DGS-3324SRi can be managed, configured and monitored via the embedded web-
based (HTML) interface. The Switch can be managed from remote stations anywhere on the network through a
standard browser such as Netscape Navigator/Communicator or Microsoft Internet Explorer. The browser acts as
a universal access tool and can communicate directly with the Switch using the HTTP protocol.
The Web-based management module and the Console program (and Telnet) are different ways to access the same
internal switching software and configure it. Thus, all settings encountered in web-based management are the
same as those found in the console program.
Login to Web Manager
To begin managing your Switch simply run the browser you have installed on your computer and point it to the
IP address you have defined for the device. The URL in the address bar should read something like:
http://123.123.123.123, where the numbers 123 represent the IP address of the Switch.
NOTE:
The Factory default IP address for the Switch is 10.90.90.90.
In the page that opens, click on the
Login to make a setup
button at the top of the window:
Figure 3- 1. Login Page
This opens the management module’s main page.
The Switch management features available in the web-based manager are explained below.
This opens the management module’s user authentication window, as seen below.
Summary of Contents for xStack DGS-3324SRi
Page 201: ......
