D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
116
Network Number
Sometimes called the Network Address. The 32-bit number in the form of
an IP address that uniquely identifies the network that corresponds to the
OSPF Area above.
Network Mask
The corresponding network mask for the
Network Number
specified
above.
LSDB Type
Specify the type of address aggregation. Choose
Summary
or
NSSA-Ext
.
Advertisement
Select
Enabled
or
Disabled
to determine whether the selected OSPF Area
will advertise it’s summary LSDB (Network-Number and Network-Mask).
OSPF Host Route Settings
OSPF host routes work in a way analogous to RIP, only this is used to share OSPF information with other OSPF
routers. This is used to work around problems that might prevent OSPF information sharing between routers.
To configure OSPF host routes, click the
OSPF Host Route Settings
link. To add a new OSPF Route, click the
Add
button. Configure the setting in the menu that appears. The
Add
and
Modify
menus for OSPF host route
setting are nearly identical. The difference being that if you are changing an existing configuration you will be
unable to change the Host Address. To change an existing configuration, click on the hyperlinked Host Address
in the list for the configuration you want to change and proceed to change the metric or area ID. To eliminate an
existing configuration, click the
X
in the Delete column for the configuration being removed.
Figure 4- 77. OSPF Host Route Settings table
Use the menu below to set up OSPF host routes.
Figure 4- 78. Add/Modify OSPF Host Route Settings
Specify the host route settings and click the
Apply
button to add or change the settings. The new settings will
appear listed in the
OSPF Host Route Settings
list. To view the previous window, click the
Show All OSPF
Host Route Entries
link to return to the previous window.
The following fields are configured for OSPF host route:
Summary of Contents for xStack DGS-3324SRi
Page 201: ......
