D-Link TM DES-6500 User Manual Download Page 326

Page: 326 / 353

Technical Support

You can find software updates and user documentation on

the D-Link website.

D-Link provides free technical support for customers for

the duration of the warranty period on this product.

Customers can contact D-Link technical support through

our web site or by phone.

Tech Support for customers within the Russia

D-Link Technical Support over the Telephone:

(495) 744-00-99

Monday to Friday 10:00am to 6:30pm

D-Link Technical Support over the Internet

http://www.dlink.ru

email: [email protected]

Summary of Contents for TM DES-6500


































































































































































































































































































































































Search results

Summary of Contents for TM DES-6500

Reviews:

Brands by name

Popular brands

D-Link TM DES-6500, User Manual

Search results

Summary of Contents for TM DES-6500

Reviews:

Brands by name

Popular brands