xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Any IP address from the allowed range of IP addresses for each subnet can be chosen as an IP address for an IP interface on the
switch.
For this example, we have chosen the next IP address above the network address for the IP interface’s IP Address:
VLAN Name
VID
Network Number
IP Address
System (default)
1
10.32.0.0
10.32.0.1
Engineer 2
10.64.0.0 10.64.0.1
Marketing 3
10.96.0.0 10.96.0.1
Finance 4
10.128.0.0
10.128.0.1
Sales 5
10.160.0.0
10.160.0.1
Backbone 6
10.192.0.0 10.192.0.1
Table 6- 5. VLAN Example - Assigned IP Interfaces
The six IP interfaces, each with an IP address (listed in the table above), and a subnet mask of 255.224.0.0 can be entered into the
Setup IP Interface
window.
To setup IP Interfaces on the Switch:
Go to the
Configuration
folder, and click on the
Layer 3 IP Networking
folder, and then click on the
IP Interfaces Table
link
to open the following dialog box:
Figure 6- 106. IP Interface Table
To setup a new IP interface, click the
Add
button. To edit an existing IP Interface entry, click on an entry under the
Interface
Name
heading. Both actions will result in the same screen to configure, as shown below.
Figure 6- 107. IP Interface Configuration window
Enter a name for the new interface to be added in the
Interface Name
field (if editing an IP interface, the
Interface Name
will
already be in the top field as seen in the window above). Enter the interface’s IP address and subnet mask in the corresponding
126
Summary of Contents for TM DES-6500
Page 1: ...User Manual Product Model TM DES 6500 Modular Layer 3 Chassis Ethernet Switch Release 3 5 ...
Page 333: ......
Page 350: ......
