D-Link TM DES-6500, User Manual

Page: 118 / 353

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
To establish the rule for a previously created CPU Access Profile:
In the Configuration folder, click the CPU Interface Filtering > CPU Interface Filtering State to open the CPU Interface
Filtering Table .
Figure 6- 76. CPU Interface Filtering Table
In this window, the user may add a rule to a previously created CPU access profile by clicking the corresponding Modify button
of the entry to configure,
Ethernet, IP or Packet Content . Each entry will open a new and unique window, as shown in the
examples below.
Figure 6- 77. CPU Interface Filtering Table – Ethernet
To create a new rule set for an access profile click the Add button. A new window is displayed. To remove a previously created
rule, click the corresponding button. The following window is used for the Ethernet Rule configuration.
Figure 6- 78. CPU Interface Filtering Rule Configuration – Ethernet
To set the Access Rule for Ethernet, adjust the following parameters and click Apply .
103