manualshive.com logo in svg

D-Link TM DES-6500, User Manual

Share
Download
D-Link TM DES-6500 User Manual Download Page 261

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual 

ClientServerPortNumber 

The UDP port the client is using to send requests to this server. 

ClientRoundTripTime 

The time interval (in hundredths of a second) between the most recent Access-
Reply/Access-Challenge and the Access-Request that matched it from this RADIUS 
authentication server. 

ClientAccessRequests 

The number of RADIUS Access-Request packets sent to this server. This does not 
include retransmissions. 

ClientAccessRetransmissions

The number of RADIUS Access-Request packets retransmitted to this RADIUS 
authentication server. 

ClientAccessAccepts 

The number of RADIUS Access-Accept packets (valid or invalid) received from this 
server. 

ClientAccessRejects 

The number of RADIUS Access-Reject packets (valid or invalid) received from this 
server. 

ClientAccessChallenges 

The number of RADIUS Access-Challenge packets (valid or invalid) received from 
this server. 

ClientAccessResponses 

The number of malformed RADIUS Access-Response packets received from this 
server. Malformed packets include packets with an invalid length. Bad 
authenticators or Signature attributes or known types are not included as malformed 
access responses. 

ClientBadAuthenticators 

The number of RADIUS Access-Response packets containing invalid authenticators 
or Signature attributes received from this server. 

ClientPendingRequests 

The number of RADIUS Access-Request packets destined for this server that have 
not yet timed out or received a response. This variable is incremented when an 
Access-Request is sent and decremented due to receipt of an Access-Accept, 
Access-Reject or Access-Challenge, a timeout or retransmission. 

ClientTimeouts 

The number of authentication timeouts to this server. After a timeout the client may 
retry to the same server, send to a different server, or give up. A retry to the same 
server is counted as a retransmit as well as a timeout. A send to a different server is 
counted as a Request as well as a timeout. 

ClientUnknownTypes 

The number of RADIUS packets of unknown type which were received from this 
server on the authentication port 

ClientPacketsDropped 

The number of RADIUS packets of which were received from this server on the 
authentication port and dropped for some other reason. 

 

246

Summary of Contents for TM DES-6500


































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands