D-Link SECURICAM Network DCS-950G User Manual Download Page 92

Page: 92 / 97

DCS-950G User’s Manual

D-Link Systems, Inc.

Contacting Technical Support

Contacting Technical Support

You can ﬁnd software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States and within
Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link technical support through our web
site, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465

24 hours a day, seven days a week.

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265

Monday to Friday 7:30am to 12:00am EST

D-Link Technical Support over the Internet:

http://support.dlink.ca

email:[email protected]

When contacting technical support, please provide the following information:



Serial number of the unit



Model number or product name



Software type and version number

Summary of Contents for SECURICAM Network DCS-950G


































































































Search results

Summary of Contents for SECURICAM Network DCS-950G

Reviews:

Related manuals for SECURICAM Network DCS-950G

Brands by name

Popular brands

D-Link SECURICAM Network DCS-950G, User Manual

Search results

Summary of Contents for SECURICAM Network DCS-950G

Reviews:

Related manuals for SECURICAM Network DCS-950G

Brands by name

Popular brands